- This topic has 0 replies, 1 voice, and was last updated 10 years, 9 months ago by
.
Viewing 1 post (of 1 total)
-
Posts
-
This dishwasher baffles me, the owner says it does dry or get hot. I checked the flow thru heater which is fine.
I used the clamp meter on the Dow whilst running through the program, on the auto program, the heater ran for 4 minutes and the water temperature is 26 degrees when it should have been at least 55degrees.
I changed the program over to quick wash a 15 mins cycle but it lasted 10 mins with heater running for 2 mins.
Would that be thermostat issue, dodgy heater or dodgy pcb?
Cheers Matt
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.