- This topic has 16 replies, 6 voices, and was last updated 18 years, 1 month ago by
.
-
Posts
-
Re: Dear Mr Masterpart….
Martin wrote:I notice that UKW stock this type of brush in their Shop@also and a number of posts from the public at large that have DIY’ed them in also make mention of the effect when first installed.
In the main I read most of the spares emails and haven’t seen any complaints about them.
Where’s this number of posts as I’ve not seen them either?
K.
Re: Dear Mr Masterpart….
goosegreen wrote:Have had the same problems as Martin with M/P Bosch BS12103 brushes and have found that the sides of the brushes need to be sanded down a bit to improve the fit
I don’t think you refer to the same brush then Goose if you have to sand them down? I find that (as I mentioned earlier) they are slightly smaller than the 154740 genuine, that they are blacker in colour and appear and feel course and gritty even.
My 3rd call this morning was a WFF2001GB/01 with knacked brushes and a minor groove on the com (as per norm). Bedding stick to clean the com, blast of WD40 to clear the muck, in with the BS12103’s just for devilment. (at this point I refer you to the comments on my previous post 😉 )
I took those out and whopped in the gen business…….peaches & cream in comparison……..!
My question therefore to Mr Masterpart is one of compatibility? I personally find they don’t compare (I think you have gathered that by now?) and I would dearly love that they were compatible because at the price Masterpart are shipping them out at is my kind of music. The Bosch gen are frightningly expensive in comparison, fact but true.
Masterpart have demonstrated their concerns over any issues we in the trade have over their response to my querie in this thread about pattern Bosch heaters. Brilliant response I must say and respect to them for that.
😀Pattern parts are the way forward, to beat the manufacturers over their audacious pricing policies the only way us indies can continue trading. It is therefore important to liaise with the likes of Masterpart at this level in order to point out any potential discrepancies toward that purpose surely?
- You must be logged in to reply to this topic.