desperate for help

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › desperate for help

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • October 27, 2009 at 1:48 pm #49646
    adv
    Participant

    cany cdi1012 dw got bullitin for reseting , dw wont start. fitted new pcb still same pump door switch ok, it says keep finger on button to reset for 3 secs and an 3 lites will flash but not rapid, wont do this unless keep button down for bowt ten secs. still cant get it to work. doin ma nut help wud be much appreciated 😳

    October 27, 2009 at 8:52 pm #300549
    A1TEC
    Participant

    Re: desperate for help

    Just a thought, some of the boards have to be set to reconise the model that it is beeing fitted to. Not saying thats a deffinate though. 😕

    John.

    October 27, 2009 at 8:56 pm #300550
    adv
    Participant

    Re: desperate for help

    how tho nah instructions at tal wi board? 😳

    October 28, 2009 at 12:03 am #300551
    Penguin45
    Participant

    Re: desperate for help

    Five different versions, Adv and one of them appears to be Chinese…… Need the product code to try and get anywhere.

    Chris.

    October 28, 2009 at 9:16 am #300552
    adv
    Participant

    Re: desperate for help

    what you meen?

    October 28, 2009 at 11:21 pm #300553
    leavemetogetonwithit
    Participant

    Re: desperate for help

    I think he means the number beginning 320… or 321…
    Mike.

    October 28, 2009 at 11:25 pm #300554
    leavemetogetonwithit
    Participant

    Re: desperate for help

    Which one of these?

    CDI1010 BUILT-IN DISHWASHER 32900099
    CDI1012 02 BUILT-IN DISHWASHER 32900034
    CDI1012 80 BUILT-IN DISHWASHER 32900060
    CDI1012 S BUILT-IN DISHWASHER 32900038
    CDI1012/1 BUILT-IN DISHWASHER 32900077
    CDI1012/1 80 BUILT-IN DISHWASHER 32900082
    (with thanks to Masterpart for information).
    Mike.

    October 28, 2009 at 11:33 pm #300555
    leavemetogetonwithit
    Participant

    Re: desperate for help

    Ok, I just saw the third (?) thread on this one. So it’s a 32900082.
    Mike.

    October 29, 2009 at 12:22 am #300556
    Penguin45
    Participant

    Re: desperate for help

    Sent Adv some stuff. Module should have been p/no 41014197.

    Chris.

    October 29, 2009 at 10:06 am #300557
    adv
    Participant

    Re: desperate for help

    thanks lads. fitted rite module still does nowt, murder an cant get it to a test seqence. no neutraul to pump or preesure switch. continuity.thru wires tho.back to board. wat if its a anotther dodgy board, ? wats best policy here dont wont to have buy another 😳

    October 29, 2009 at 10:51 pm #300558
    whiskeyjack6058
    Participant

    Re: desperate for help

    Think I’d start looking for broken wires… Perhaps in the door loom…

    October 29, 2009 at 11:03 pm #300559
    adv
    Participant

    Re: desperate for help

    looked cant see any 😳

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.