Diplomat ADM 8513

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat ADM 8513

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 11, 2011 at 8:46 am #66802
    atech
    Participant

    I have just been to look at one of these. After selecting a program, the machine starts to fill in very short bursts. I fill the maching using a jug to speed things up. Once filled I’m getting no drum action. If I put it on a spin it will empty, but again no drum action. The brushes are ok. Motor or module fault?

    December 11, 2011 at 5:17 pm #365253
    A1engineer
    Participant

    Re: Diplomat ADM 8513

    module fault, have a look for dry joints on board, i usually just replace module tho.

    December 12, 2011 at 6:15 am #365254
    atech
    Participant

    Re: Diplomat ADM 8513

    Ok thanks. I thnink they will proberbly change the machine.

    December 12, 2011 at 8:44 pm #365255
    leavemetogetonwithit
    Participant

    Re: Diplomat ADM 8513

    This may be a red herring but having had not long ago a Whp dw giving exactly that symptom and being helped by Dave electrofix to a happy ending in that story, it wouldn’t surprise me too much if the module might be fixed easily enough. PM me if interested in having a go.
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.