Diplomat ADP 8102/1

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat ADP 8102/1

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 5, 2007 at 12:32 pm #29521
    Tonythefish
    Participant

    Hi

    My Diplomat dishwasher, model ADP 8102/1 has developed a fault. It appears to be halfway through a cycle, there is water in the bottom of the machine and it keeps on heating up. I have tried switching to the cold rinse but it still heats up. I have also switched the machine off at the mains, left it for about 15 minutes and retried, it will try and pump for about 10-15 seconds and then stop, but it will then heat up the water again. Is there anything that I can do to try and resolve the situation?

    Tony

    August 5, 2007 at 2:08 pm #223496
    Penguin45
    Participant

    Re: Diplomat ADP 8102/1

    Earth fault on heater or timer problems most likely culprits.

    Power off, if you plan to investigate.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.