Diplomat ADP 8342 Dishwasher – 10 bleeps problem

[chrissie]

My four month old Diplomat ADP 8342 is refusing to work today. When I switch it on, it bleeps 10 times and the three left hand side red lights flash. Is there anything I can do to reset this?

[Dave_Conway]

Re: Diplomat ADP 8342 Dishwasher – 10 bleeps problem

There is no reset procedure for this model I’m afraid, the three lights indicates an overfill or flooding problem.

You could try leaning the dishwasher forward or backwards to see if the base has become flooded, water will run out from the bottom so towells at the ready 😉

If that doesn’t solve it, then you’ll need an engineer to be honest, phone MFI extracare as it’s still in warranty.

This model is made by Haier so a lot of the other information on here (which is mainly Smeg and Whirlpool related) about Diplomat dishwashers won’t apply regarding reseting etc.

Dave.

[chrissie]

Re: Diplomat ADP 8342 Dishwasher – 10 bleeps problem

Dave

Thanks very much for your reply – it’s great to get such an informative answer so quickly and much appreciated.

Chrissie

[Author]

Posts