Diplomat ADP0150 oven not working

Home Forums Public Support Forums Help And Support Cooker And Oven Forum Diplomat ADP0150 oven not working

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #35345
    icklefc
    Participant

    Hi there,

    I have had this Diplomat ADP0150 oven for over 2 years now and all of a sudden the oven just does not seem to be heating food.

    The oven is igniting and seems to be warming up as heat is getting into baking trays and oven shelves but the food remains cold to touch after “cooking” as per instructions.

    Any suggestions would be gratefully received.

    Thanks

    #246167
    kwatt
    Keymaster

    Re: Diplomat ADP0150 oven not working

    Hi,

    It’s an all gas oven which likely will mean the the FSD has failed, that’s the most common reason for no heat in my experience.

    You will require a CORGI registered repairer to look at it for you and the FSD is listed at £85 plus VAT. Gas appliances are rarely cheap to fix I’m afraid.

    HTH

    K.

    #246168
    icklefc
    Participant

    Re: Diplomat ADP0150 oven not working

    There is heat getting into the oven though this is what is confusing me. The flame ignites and once preheated, baking trays and oven shelves are too hot to touch. It just isn’t cooking any food that is put in. Once the food has been in “cooking” when the door is opened you can feel the heat escape.

    I thought the FSD just cut off the gas supply if there was an issue but the flames are still lit.

    #246169
    karv
    Participant

    Re: Diplomat ADP0150 oven not working

    oldish post but u may read this im bored hehe
    if cooking with 1 tray use the top 2 lines of the middle section in oven
    1) have u just come from a electric oven to gas? can be a fairly large heat diffrence between bottom and top of oven.
    2) check door is closing well still and you will lose some heat from the metal bar at top where seal is that is normal

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.