- This topic has 1 reply, 2 voices, and was last updated 18 years, 11 months ago by
.
-
Posts
-
Hi guys, hope you can help me out!!
Basically my dishwasher went south a short while ago, it started normally but carried on for ages and wouldnt stop, I attempted to repair it then and failed but am back on it now as im sick of washing up!!
At the moment when i turn it on it just makes a wurring noise over and over again, hard to explain the noise! and it starts to smell a little funny?
It looks like the element is getting hot but there isnt any water maybe? ~Ive tried to manually put water in it but it just drains when i close the door?
Tonight I tried to Anull the program but now I dont have any lights on at all and whenever i close the door with the power on it makes the same wurring noise
Sorry for been vaige, not my forte but am willing to take it to bits if i have to?
Many thanks in advance!!
Matt 🙁
Re: Diplomat ADP8132 please help
Not given us much to go on, I’m afraid. One thing is for sure though – the tray under the machine is full of water and the drain pump is running because the flood protection system is activated. Power off, drain the tray and start again. Make a note of which lights are flashing when it faults when you restart it.
Regards,
Penguin45
- You must be logged in to reply to this topic.