diplomat ADP8322

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › diplomat ADP8322

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 7, 2007 at 5:26 pm #31164
    robbyn
    Participant

    Hi,
    Here’s hoping somone can help, i have one of these dish washers and the power is turned on and the master switch is on but no lights or beeping at all. tested power at main switch and have 18v a/c.
    Is this correct i am presuming not??
    cheers
    Rob 😕 🙁

    October 7, 2007 at 5:33 pm #230042
    Penguin45
    Participant

    Re: diplomat ADP8322

    Main switch should run at 240v. Do not continue to live test – it’s down right dangerous.

    Check terminal block and mains suppressor for failure, also socket itself.

    Please stay safe……

    Penguin45.

    October 7, 2007 at 5:52 pm #230043
    robbyn
    Participant

    Thanks for your quick reply penguin,
    So the power comes from wall socket then to mains suppressor, then on to switch then control panel then the rest of the cosumers in the system, is this correct?
    Thanks again
    Rob

    October 7, 2007 at 5:56 pm #230044
    Penguin45
    Participant

    Re: diplomat ADP8322

    Yes – use continuity test mode to trace.

    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.