Diplomat ADP8322 dishwasher – re-programming new pcb

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat ADP8322 dishwasher – re-programming new pcb

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 4, 2008 at 6:02 pm #41591
    DerekKing
    Participant

    Our Diplomat ADP8322 dishwasher packed up & a new circuit board was identified as being required.

    However the board apparently needs to be re-programmed and the suppliers of the part don’t have the programming code which is retained by the installers (we think MFI … who are now facing liquidation?). The machine was bought by the previous owners of the house we’ve moved in to so we don’t have any contractual/warranty rights.

    Can anyone advise about re-programming codes?

    Many thanks.

    Derek King

    December 4, 2008 at 6:39 pm #270689
    EFS
    Participant

    Re: Diplomat ADP8322 dishwasher – re-programming new pcb

    ADP8322 is a badged up Whirlpool and the new board should be pre programmed.
    If you have been supplied with a “blank” board or indeed the wrong part then it won’t work and you will need the services of an engineer equipped with a Whirlpool SAM module to put the program in.

    I have one and so do others on this site who may be able to assist.

    Steve

    December 4, 2008 at 6:41 pm #270690
    Penguin45
    Participant

    Re: Diplomat ADP8322 dishwasher – re-programming new pcb

    Post up the 12nc code (starts 8—–). Pre-programmed boards are available.

    Penguin45.

    December 4, 2008 at 8:44 pm #270691
    karv
    Participant

    Re: Diplomat ADP8322 dishwasher – re-programming new pcb

    ps plus mfi only used programmed modules

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.