Diplomat adp8322 f3 problem

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat adp8322 f3 problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 9, 2005 at 12:04 pm #12456
    lofty
    Participant

    After looking on this site it appears I am the only one having problems with 3 beeps (F3), I think this means. Problem is there is no heater operating. Completes the cycle but not hot at the end and get 3 short beeps then repeats. I know this is a fault code 3 but can anyone tell me the fix. The machine is 18 months old with daily use after the 1st 12 months.

    October 9, 2005 at 1:29 pm #149763
    Dave_Conway
    Participant

    Re: Diplomat adp8322 f3 problem

    F3 on this Whirlpool manufactured model normally indicates a defective PCB control unit 🙁

    I would suggest an engineer checks the rest though before condemning it, check Repairs@ for one 🙂

    Dave.

    October 13, 2005 at 7:15 pm #149764
    Curly
    Participant

    Re: Diplomat adp8322 f3 problem

    F3 on this appliance is a system heating failure, engineer time I’m afraid

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.