DIPLOMAT APM8512/1 OVERFILLING/NOT SPINNING/LEAKING

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › DIPLOMAT APM8512/1 OVERFILLING/NOT SPINNING/LEAKING

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 25, 2009 at 9:34 pm #48077
    MIFFY715
    Participant

    Machine continues to fill with water. Intermittently spills from soap drawer and front door. Have to manually switch to spin cycle to empty, but doesn’t always spin fully. Also, washing still feels warm after cycle has finished. Any ideas?

    August 25, 2009 at 11:52 pm #295491
    Penguin45
    Participant

    Re: DIPLOMAT APM8512/1 OVERFILLING/NOT SPINNING/LEAKING

    The thinner hose pictured HERE is likely to be choked with sludge and old soap. Strip and clean.

    Power off first.

    Penguin45.

    August 29, 2009 at 2:11 pm #295492
    MIFFY715
    Participant

    Re: DIPLOMAT APM8512/1 OVERFILLING/NOT SPINNING/LEAKING

    Have checked this pipe and both are clear. Today washer did almost full cycle (programme 5) but when it got to Spin cycle (C) water came gushing out of the soap drawer pushing it open.

    August 29, 2009 at 8:00 pm #295493
    Penguin45
    Participant

    Re: DIPLOMAT APM8512/1 OVERFILLING/NOT SPINNING/LEAKING

    Check the air hose connected to the pipe underneath for pin holes and chaffing, check that the pressure switch “clicks” when pressurised (Gently!).

    Power off first, please.

    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.