Diplomat D/washer tripping stat

[boywonder]

Been twice to an Diplomat full size integrated dishwasher ADP 8112 and twice reset the heater stat (little red button in middle of stat). I`ve reset quite a few and never had to go back to any. Cannot see anything obvious

Anyone had the same problem and know why ?
Thanks

[bagman]

Re: Diplomat D/washer tripping stat

Couple of possibilities.

It could be the one where the ‘official’ fix was to pull the heater apart slightly where it covers the stat. Originally it was too close and caused the stat to o/heat. (The newer ones are a different shape around the stat now).

Alternatively it could be the usual 3 in1 tablet issue combined with customer still putting R/aid and causing machine to oversud and therefore overheat the stat.

[boywonder]

Re: Diplomat D/washer tripping stat

Thanks for the tips, spoke to a fellow engineer who also raised the issue of overfoaming. Will advise customer and adjust heater.

[Author]

Posts