- This topic has 1 reply, 2 voices, and was last updated 14 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi
As above select program press start and machine will pulse the pumps, valves and lights for 4/5 mins then it gets going and most times will complete a cycle. Some times stops part way through cycle, if door is opened and closed it will complete cycle. No error codes are shown. All wiring and connections OK. Any thoughts on this.
Mike
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.