Diplomat E9 Error Code

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat E9 Error Code

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 17, 2007 at 7:21 pm #29868
    hegs010
    Participant

    Hi,

    I’ve searched the forums without success to try to discover what the E9 error code my Diplomat ADP 8234 dishwasher is displaying means! Unfortunately the instruction manual doesn’t list this code 🙁

    The dishwasher will start the programme, but stop after a minute or so – before any water has got to the dishes.

    Any help would be greatly appreciated.

    Thanks, Hegs 😀

    August 17, 2007 at 8:49 pm #224973
    Penguin45
    Participant

    Re: Diplomat E9 Error Code

    Basically, it’s the flood protection system being activated, repeatedly. This means that the water level control system is not being activated. Level switch may not be working (unusual), or there is a blockage in the pipework somehere (common).

    Power off if investigating.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.