Diplomat Model ADP 8132 Type 12043 Error Code ?

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat Model ADP 8132 Type 12043 Error Code ?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 4, 2005 at 4:58 pm #9946
    admin
    Keymaster

    Hi All,
    Can anyone assist me with this error code or advise a course of action ?

    Power on, lights 4 & 5 displayed, followed by a long beep and finally lights 3 & 5 are permanently displayed.

    Any help would be greatly appreciated.

    🙂

    June 4, 2005 at 5:12 pm #136925
    litlor
    Participant

    Re: Diplomat Model ADP 8132 Type 12043 Error Code ?

    when does the fault happen at the start or does it fill with water, wash then the fault appears if so poss not heating

    June 4, 2005 at 5:58 pm #136926
    Penguin45
    Participant

    Re: Diplomat Model ADP 8132 Type 12043 Error Code ?

    Temperature sensor failed/out of circuit – can be computer board fault. Tricky one to diagnose – maybe pro help best bet?
    Check repairs@ or Directories for a UKW repairer in your area.

    Regards,
    Penguin45.

    June 4, 2005 at 11:46 pm #136927
    admin
    Keymaster

    Re: Diplomat Model ADP 8132 Type 12043 Error Code ?

    Thanks for the feedback, the error occurs straight away, no water fill, no anything. Happens as soon as it’s turned on. 🙁

    June 5, 2005 at 12:46 am #136928
    Penguin45
    Participant

    Re: Diplomat Model ADP 8132 Type 12043 Error Code ?

    Error is detected at programme start by computer diagnostic check. See post above for actual fault.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.