Duraspeed shower pump failed need a good replacement

Home Forums Public Support Forums General Enquiries And Questions Duraspeed shower pump failed need a good replacement

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #59679
    beermontypython
    Participant

    It’s a long time since I last begged your help but I am hoping you can oblige once again.
    My shower pump has failed and I need to buy a decent new one I think.
    When I disconnect the pump from the water supply and turn it on it sounds fine but when I connect it back up it runs for about one minute then starts to slow down and eventually stop, there is also a slight hot smell. I have looked for ages on the internet but there are so many and I haven’t got a clue which are worth buying and which are not.

    I only need to power one shower and have a very good quality NHS thermostat control Armitage Shanks.
    I have always thought Grundfos were good quality but Salamander and many others also read to be ok.
    Can I beg some advise please from all of the qualified experts out there before I go and make a costly mistake.
    Thank you

    #339242
    don
    Moderator

    Re: Duraspeed shower pump failed need a good replacement

    Hi

    Not many if any of the guys and gals on here deal in showers I’m afraid. A good site to visit though is Showerdoc there is a tech forum as well.

    HTH 🙂

    Don

    #339243
    beermontypython
    Participant

    Re: Duraspeed shower pump failed need a good replacement

    thanks don

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.