dwwhite’s Thread Of Lies

Home Forums Public Support Forums Help And Support Washing Machine Help Forum dwwhite’s Thread Of Lies

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #81345
    dwhite1
    Participant

    Lawrence wrote:
    And the problem with that is ?
    If I go and put petrol in my car instead of diesel ,what are the chances of Ford saying “oh ok we will fix it U/G for you” – I think we know the answer to that.

    Oh please. Putting Ariel in to a machine instead of Bold is no where near the same as putting petrol in to a diesel car! Overdosing or under dosing will cause poor wash results and after a HUGE amount of time if overdosing may cause problems, but in this instance, this does not apply as the OP has now stated that he had faulty components.

    lawrence wrote:I take offence at that ,I am an ISE agent,and neither my staff or myself are bone idle, In my experience ISE agents are very good ,Thats not to say you may not get the odd one that is lacking ,but to my knowledge ISE do there best to filter anyone not up to the job.
    You seem to make a lot of sweeping statements here and have an axe to grind do you own an ISE ?

    I’m surprised that you take offence as I never once mentioned you or your nickname. But, it says no where on the joining rules that members have to answer other members when questioned here so I’ll not bother to respond to you in that respect unless I can have my phone call and a solicitor :rolls:

    richardhw wrote:Thanks to Kwatt for your help and thanks to Roy Waring for their help too.

    I deserve a thank you also. If it were not for my intervention and comments here, you would have been treated like just another moaning customer. It seems that comments here made in the public eye get a better reaction to those made via telephone, email or letter. See below also. Another disgruntled customer that has resorted to come to the ISE owners website to get his attention :rolls:

    washing-machine-forum/ise-year-warranty-t68953.html

    #416304
    kwatt
    Keymaster

    Re: ISE 10 1606W Drum not turning

    dwhite1, what is your machine and when did you buy it?

    We can find no record at all of you and, all out machines are registered so this is most perplexing.

    In fact think that you are a liar and that you do not own and, have never owned an ISE product. I think that you are little more than a troll here to cause trouble. You could be a competitor or, you might be someone that just has a dislike of the people here or, even just ISE.

    But until you can provide some proof that you are an actual real person, you’re no more than an annoyance and nobody should pay any attention to you at all.

    K.

    #416305
    dwhite1
    Participant

    Re: ISE 10 1606W Drum not turning

    kwatt wrote:I in fact think that you are a liar and that you do not own and, have never owned an ISE product. I think that you are little more than a troll here to cause trouble. You could be a competitor or, you might be someone that just has a dislike of the people here or, even just ISE.

    But until you can provide some proof that you are an actual real person, you’re no more than an annoyance and nobody should pay any attention to you at all.

    K.

    You should take lessons in dealing with the public and customer service. Your attitude resembles a fat cat talking down to mice.

    #416306
    kwatt
    Keymaster

    Re: ISE 10 1606W Drum not turning

    Oh, I’m sorry, cat got your tongue?

    Or is it the case that you are a troll?

    Hmm, I wonder. Given the lack of any proof that you are even an ISE customer or ever have been.

    You’ve been called out on it, give me the proof that you own one or are an ISE customer at all.

    For the people that read this after the event, there are a number of people that would dearly love to see ISE fail. It either doesn’t suit them from a customer service perspective, business model perspective or whatever else, goodness only knows why. Maybe the mice or cats are getting too rebellious, I’m very confused about that.

    But, it doesn’t negate that simple fact that the guy posting all this crud is a complete and utter fake, a liar. Unless of curse he or she can provide evidence to the contrary, which I doubt very, very much.

    K.

    #416307
    dwhite1
    Participant

    Re: ISE 10 1606W Drum not turning

    kwatt wrote:For the people that read this after the event

    The ISE owner kwatt is a very arrogant and disrespectful man. After the way he’s spoken to me here as an apparent company manager or professional, I would not buy his machines again if they came with a physical person to load it and unload it, were plated in gold and had a lifetime warranty all for 99 pence.

    Mr kwatt, I’m sure your board of directors would be proud to see how you speak to people and I’m sure they’ll be happy knowing that you fly the ISE flag on this website.

    #416308
    kwatt
    Keymaster

    Re: ISE 10 1606W Drum not turning

    And, again, what are your details so I can confirm that you own or have ever owned an ISE?

    So far as I can see, you can’t buy again as you never bought one in the first place so, that makes you a liar or a plant for a competitor.

    Failure to answer pretty much confirms this as does your evasion of the question asked.

    I will talk to someone that attacks any business I am involved in in any way I please just as I will defend ISE customers and dealers in the same way and you, thus far, are just trying to cause trouble for all, no more.

    In the absence of any details that you are an ISE customer, you’re a liar on to cause said trouble and that being the case, I can talk to you however I please given the accusations being made by you.

    Of course I could seek legal redress for slander and seek your actual identity from your ISP.

    Have a nice day.

    K.

    #416309
    dwhite1
    Participant

    Re: ISE 10 1606W Drum not turning

    kwatt wrote:And, again, what are your details so I can confirm that you own or have ever owned an ISE?

    You already have our details. On your ISE complaints database!

    kwatt wrote:So far as I can see, you can’t buy again as you never bought one in the first place so, that makes you a liar or a plant for a competitor.

    How can you possibly tell that from a forum username or email address? That statement alone makes me sick that you would talk to a customer in this way just because you do not recognise the email address or username. It is a big world and people have many email addresses!

    kwatt wrote:I will talk to someone that attacks any business I am involved in in any way I please just as I will defend ISE customers and dealers in the same way and you, thus far, are just trying to cause trouble for all, no more.

    This is a free country. Freedom of speech was granted a long while ago. You offer these facilities where users can create a username and post. They are your rules, not mine. I oblige your rules and now I get demanded to announce my personal details here. I don’t think so!

    If you want it your way, make it so people have to use real names. Otherwise, don’t moan when they don’t and certainly do not criticise when we do not want to issue real information over the internet in your website!

    kwatt wrote:In the absence of any details that you are an ISE customer, you’re a liar on to cause said trouble and that being the case, I can talk to you however I please given the accusations being made by you.

    Please re-read above!

    kwatt wrote:Of course I could seek legal redress for slander and seek your actual identity from your ISP.

    Feel free. If my door ever gets a knock from the Police or if I get a letter, I’ll hold my hands up before I issue my proof of bad service.

    kwatt wrote:Have a nice day.

    Do you read these back? Your fellow directors will not be happy I guess. The way you represent ISE is appalling.

    #416310
    kwatt
    Keymaster

    Re: ISE 10 1606W Drum not turning

    So, since there’s no record of you anywhere, what’s the details?

    If you cannot provide that, you’re just a liar and not a customer at all.

    So come on, you’re big enough to bump your gums, put your money where your mouth is and tell us who you really are then? Or, have you got something to hide, which I think you have.

    Otherwise I’ll consider starting legal proceedings and we’ll see who’s right or wrong as I suspect I know where it will end up just as I think who is masquerading using this account.

    K.

    #416311
    dwhite1
    Participant

    Re: ISE 10 1606W Drum not turning

    kwatt wrote:So, since there’s no record of you anywhere, what’s the details?

    If you cannot provide that, you’re just a liar and not a customer at all.

    Please re-read what I’ve already said :rolls:

    kwatt wrote:So come on, you’re big enough to bump your gums, put your money where your mouth is and tell us who you really are then? Or, have you got something to hide, which I think you have.

    Please re-read what I’ve already said :rolls:

    kwatt wrote:Otherwise I’ll consider starting legal proceedings and we’ll see who’s right or wrong as I suspect I know where it will end up just as I think who is masquerading using this account.

    Please re-read what I’ve already said :rolls:

    #416312
    kwatt
    Keymaster

    Re: ISE 10 1606W Drum not turning

    Don’t need to re-read anything.

    You need to answer the questions posed or, you’re just a lair here to cause trouble and I pretty much now know that to be the case.

    You do not and have never owned an ISE product.

    In the absence of any evidence to the contrary the above holds true, you are a liar, a cheat, a cad, a complete utter idiot IMO, whatever you choose.

    Now, it’s on you to prove otherwise.

    K.

    #416313
    dwhite1
    Participant

    Re: ISE 10 1606W Drum not turning

    kwatt wrote:Don’t need to re-read anything.

    You need to answer the questions posed or, you’re just a lair here to cause trouble and I pretty much now know that to be the case.

    You do not and have never owned an ISE product.

    In the absence of any evidence to the contrary the above holds true, you are a liar, a cheat, a cad, a complete utter idiot IMO, whatever you choose.

    Now, it’s on you to prove otherwise.

    K.

    Wow. You’re the ISE MD?

    I think your board need to have a rethink and sack you. Maybe having you on board is half or at least most of the reason your other company NW Appliances has Adverse Credit reports and is in Liquidation and ISE is struggling to stay afloat.

    I’ll reveal myself the next time David calls me begging me to do a service call as you’re in the sh1t.

    #416314
    kwatt
    Keymaster

    Re: ISE 10 1606W Drum not turning

    My apologies to the innocent bystanders.

    Okay, Adrian, let’s do this dance again you fool.

    1. There is no complaints database, ISE and UKW complaints are so low as to be that none is required.

    2. There is no board of directors that could sack me.

    3. ISE and UKW are financially stable, in fact is just fine, thanks for asking unlike your several failed businesses.

    4. The only way you could come out with the rubbish you have is if (a) you worked for the company or, (b) you are Mr Adrian Bernard Welke out to cause material harm.

    5. I wouldn’t ask your incompetent possibly criminal self to do work even if I was so desperate beyond belief and, just for the record, here’s the domains you trade under:

    uktradetalk.com
    appliancecare-manchester.co.uk
    appliancerepairwolverhampton.co.uk
    huddersfieldappliances.co.uk
    appliance-care-sheffield.co.uk
    appliancecare-norwich.co.uk
    appliancecare-dudley.co.uk
    appliancerepairexeter.co.uk
    appliancecare-swansea.co.uk
    appliancecare-york.co.uk
    appliancecareliverpool.co.uk
    appliancecare-telford.co.uk
    appliancecare-bradford.co.uk
    appliancecare-guildford.co.uk
    appliancecare-taunton.co.uk
    appliancecare-ipswich.co.uk
    appliancecare-bournemouth.co.uk
    appliancecare-canterbury.co.uk
    appliancecare-brighton.co.uk
    appliancecare-slough.co.uk
    appliancecare-watford.co.uk
    appliancerepairbirmingham.co.uk

    My apologies if I’ve missed one or two.

    6. You do not deserve to trade, Trading Standards should shut your organisation down forthwith.

    7. You are misleading consumers.

    8. I wouldn’t ask you to do work for an ISE customer for fear you killed someone.

    9. Your own business/es are in more financial danger than most.

    10. David wouldn’t ask you, let alone beg you.

    There you go, ten good reasons why you’re a fool and all you’ve down here is make yourself look a bigger fool than you already had.

    Oh and, just FYI, I banned all the above from this site from advertising as I don’t want to see people being ripped off by unscrupulous traders. Along with all the other garbage you’ve tried to mislead people with on Google Adwords.

    In case you’re wondering, I’d bet some pennies that this will get screen grabbed and sent to the internet police forthwith, knock your socks off you idiot.

    This account, like all your others, is about to be subject to moderation as you are cheat, a liar and a downright all around nasty little piece of work.

    Have a nice day.

    K.

Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.