Electra TDC7100B tumble dryer- E06

[snig]

Dryer runs for a few seconds then comes up with led 2 & 3 flashing. Lint filter and condenser leds. The manual says E06 , contact service agent
Anyone know what E06 refers to ???

[Hollytree_Technical]

ASWO has the service manual for this one – would need the serial number to get the exact right version though, I picked one at random and got this list:

• E03 = Aquaswitch connector is disconnected
• E04 = Heater connector is disconnected
• E05 = Heater NTC is disconnected
• E06 = Door NTC is disconnected
• E08 = Voltage fluctuation

Door NTC = 12K @ 20C
Heater NTC = 19.5K @ 20C

Hope that helps

Jem

[snig]

Thats excellant thanks. At least i have somewhere to start looking

[snig]

Unfortunatley the door ntc circuit tests out ok. Guessing it must be pcb ????

[washingmachinewoman]

assume you checked the heater and heater ntc?

[electrofix]

so your getting 12K at 20 degrees with the connector disconnected from the board ?

Dave

[Author]

Posts