ELECTROLUX 949711937

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ELECTROLUX 949711937

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 4, 2013 at 10:36 am #73345
    robbo1973
    Participant

    Hi all cust saying fault code C37 showing has anyone got the codes for this model?

    cheers chris

    January 4, 2013 at 10:46 am #387159
    iadom
    Moderator

    Re: ELECTROLUX 949711937

    Moved to correct forum, why on earth did you post it in Trade Work and Vacancies.????

    January 4, 2013 at 10:58 am #387160
    repman
    Participant

    Re: ELECTROLUX 949711937

    Dont think this is going to help but—

    The table below describes the various error codes:
    ERROR CODE DESCRIPTION OF THE CAUSE
    F02 Door lock system
    (featured only on pyrolytic ovens).
    F03 EEPROM Memory on Control Unit.
    F04 Oven sensor temperature range exceeded
    (condition occurs for more than 5 seconds).
    F05 Temperature safety limit exceeded
    > 350°C on normal ovens.
    > 530°C on pyrolytic ovens.
    (condition occurs for more than 10 seconds).
    F08 Communication interruption between Control unit and
    power board.
    F09 Software compatibility between Control unit and power
    board.
    F10 Faulty triac (on power board)

    jim

    January 4, 2013 at 11:56 am #387161
    Washman
    Participant

    Re: ELECTROLUX 949711937

    HIi

    According to TDS all fault codes are F** , and C39 shows when diagnostics is entered. There is no mention of C37 on TDS.

    Mike

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.