- This topic has 2 replies, 3 voices, and was last updated 16 years, 9 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
This machine has come back to bite me on the bum. I fitted a new module to this machine about seven months ago because fault code EC07 was displayed when in the diagnostics mode. The new board was fitted and all seemed well since it has worked OK for the last seven months. The original fault code EC07 was then displayed. I cheded the pump on a bench test and it worked OK. I assumed it was the module again!! On changing the module the same fault was displayed EC07. I have tried to exit the alarm code by switching off/on/off with little success. Have I missed anything or could the new board be U/S. I am pulling my hair out on this one and I am already bald.
Regards
Taff
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.