Electrolux EOC68000X PNC 94418282000

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Electrolux EOC68000X PNC 94418282000

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 27, 2019 at 10:05 am #95390
    rocker
    Participant

    When turned on it appears the Pyrolytic heating is running all the time, there’s no control of temperature, it has burnt & damaged the oven seal and the control panel is getting hot…I have little knowledge of this oven. It has two electronic boards….may be a uneconomical repair….any advice would be welcome…John

    January 27, 2019 at 11:14 am #460221
    electrofix
    Moderator

    so when you turn on from the wall the oven goes straight into cleaning mode?

    should not overheat because there is an overheat thermostat fitted in case electronics fail

    Dave

    January 27, 2019 at 11:33 am #460222
    rocker
    Participant

    Hi Dave, yes when turned on excessive heat straight away ..no control to turn it down…have to turn off at the wall..

    January 27, 2019 at 11:52 am #460223
    rocker
    Participant

    As you are unable to control the temperature via the fascia control buttons I presume one of the PCB is faulty…

    January 27, 2019 at 12:03 pm #460224
    electrofix
    Moderator

    rocker wrote:As you are unable to control the temperature via the fascia control buttons I presume one of the PCB is faulty…

    I would agree with that

    Dave

    January 27, 2019 at 12:08 pm #460225
    rocker
    Participant

    Cheers Dave.. thanks for you help…John

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.