Electrolux EWX14450W No display pnc91460600100

[Bernie]

Electrolux EWX14450W No display so cannot program or start machine
Have power to PCB tried new door lock, still no display.
Had board out looked for dry joints etc all seems ok
Did look on Connections for new PCB it shows 2 for this model, 1 is not configured and 1 is configured at £154.97 +VAT
Any suggestion please
Bernie

[suedehead1]

Re: Electrolux EWX14450W No display pnc91460600100

hi i have had a couple the same it would be the pcb but you would need the configured one unless you know how to configure the unconfigured one.
is it worth spending that amount of money on?
i dont beleive emw repair them.

[Bernie]

Re: Electrolux EWX14450W No display pnc91460600100

Thanks for the reply that is what I was thinking, if it is the PCB. I do not think EMW do them might give them a ring in the morning

Thnks Bernie

[M1]

Re: Electrolux EWX14450W No display pnc91460600100

Hi

Had a similar fault when I arrived the door would lock you could set the program but nothing happend.
Now the door dose n’t lock !

could it just be the door lock ?

any ideas or tests I can do before I order a PCB as well ?

[Author]

Posts