- This topic has 2 replies, 3 voices, and was last updated 20 years, 6 months ago by
.
-
Posts
-
Hi, My hot piont ultima 1200 microprofile is flashing an E 30 number on the screen but i’ve not got my manual anymore can anyone tell me what this means
Re: Error codes for hot piont ultima 1200 microprofile
It means there is no signal from the tacho, ( the motor is not running 😉 ) It may not be too expensive, two different motors used on this machine with different brushes, one far more reliable than the other, have a look in Repairs@ for someone in your area.
Remove the plug if you intend to ‘go inside’
Re: Error codes for hot piont ultima 1200 microprofile
Most likely the Motor Brushes are worn and need replacing. See http://www.ukwhitegoods.co.uk/modules.p … ducts_id=1 for replacements.
…and Repairs@ for and expert to fit them for you! 🙂
- You must be logged in to reply to this topic.