- This topic has 1 reply, 2 voices, and was last updated 16 years, 12 months ago by
.
-
Posts
-
This machine was left in a moist environment for a long time. After taking apart cleaning and drying everything and reassembly. The main motor behaves erratically- then beeps and comes up with error code across the top bank of LEDS: 0 0 0 0 1 0 1 1.
Holding down the advance while power button is switched has the LEDs scanning from left to right for a minute or so, then the same error above.
Holding down the start/ pause while the power button is switched has hold, and warm lit and 0 0 1 0 0 0 0 0.Anyone know what this means?
Re: Error codes with F&P kelvinator smart drive 058
Hi
The error code of “0 0 0 0 1 0 1 1” read off the wash progress LEDS is fault code 11 “Pressure Sensor Fault”. If you’re stating the main motor behaves erratically then I suspect that the motor controller (yellow main board) is causing the problem.
Do you live in Auckland? If so give me a call on 9481319 and I may be able to help you out.
The later modes you have tried wil be of no use to you in this case.
- You must be logged in to reply to this topic.