EWX14440W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › EWX14440W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 26, 2009 at 8:17 pm #49624
    Kez
    Participant

    This Washer is aborting the programme after a couple of minutes and releasing the door lock. It only does it from time to time – am I looking at pcb? cheers, Kez

    October 26, 2009 at 8:44 pm #300466
    chris211
    Participant

    Re: EWX14440W

    Hi any fault codes listed in diagnostics and have you checked the dryer heater they are prone to playing up

    October 26, 2009 at 8:53 pm #300467
    TheSpinDoctor
    Participant

    Re: EWX14440W

    You are looking for either Ed4 or E36 in the memory for the drier element issue. You may find if you check the insulation from cold all is well but it will break down once it has been running for a few minutes.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.