FDW70 Hotpoint dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › FDW70 Hotpoint dishwasher

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 1, 2012 at 9:49 am #68195
    scientist
    Participant

    Hi folks, the dishwasher seems to start ok but then sits down and the motor pulses. The display then seems to go from 19 to 22 on the quick wash and repeats this sequence. Pcb is my first thoughts but would like to see if anyone has dealt with this issue before??
    Thanks in advance..

    March 1, 2012 at 4:41 pm #370154
    Criscold
    Participant

    Re: FDW70 Hotpoint dishwasher

    I had one with a burnt tag on the door switch that caused strange program faults

    Colin

    March 1, 2012 at 9:36 pm #370155
    johnnyj
    Participant

    Re: FDW70 Hotpoint dishwasher

    Had one recentlty when the wash pump was just pulsing all the time when i looked underneath there was a small harness from the module to a plug going to the motor had burnt conections, trouble is for this little 20cm idc harness they wanted £65 plus vat to buy.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.