Firenzi FIDW41 Not filling

[admin]

Re: Firenzi FIDW41 Not filling

Wow! Thanks guys. Ok, 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure its a Zanussi – Mainly because the Magnet guy said at the time that it was a Zanussi hybrid as well.

I will follow the double-chamber checks and have a good look. I have been giving it strong vinegar washes etc. However, not sure how this will help as it is the ‘water inlet’ that is the problem – it aint filling.

What does the pressure chamber/s do in a dishwasher? In a coffee maker it is used to build the steam pressure, but this model diskwasher only goes up to 65C – so tghe programme says.

I will indeed take pictures of the inside and underneath and get them e-mailed tommorrow.

Thanks guys!

Mat

[Penguin45]

Re: Firenzi FIDW41 Not filling

The pressure chambers trap air as the water level rises, this is displaced into the pressure switches to control the water level.

Regards,
Penguin45.

[johnboy]

pressure switch part no.1526370000 should sort out the problem located at the front right hand side (remove r/h panel) for easier access

[Author]

Posts