Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Fisher pakel drawer dishwasher dd603
- This topic has 14 replies, 7 voices, and was last updated 14 years, 11 months ago by
bmrenr.
-
AuthorPosts
-
May 4, 2011 at 7:42 am #62571
bmrenr
ParticipantHi I have a call to above appliance which is given an error code of f4 which I see from known error codes is no heat detected.I have never been to one of these. Could someone tell me how to get to the heating element and pcb.all help greatly appreciated.
Tom.
May 4, 2011 at 7:32 pm #350515dave-m
ParticipantRe: Fisher pakel drawer dishwasher dd603
send me your email and i’ll send you something
May 4, 2011 at 8:25 pm #350516kwatt
KeymasterRe: Fisher pakel drawer dishwasher dd603
JM11, can you tell him what’s up with it? 😉
K.
May 5, 2011 at 3:00 am #350517johnmac11
ParticipantRe: Fisher pakel drawer dishwasher dd603
It will be either the heater plate or the controller that is at fault but 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time it is a faulty heater plate.
This is one of those jobs that will take me 20 minutes at most to do but will take a lot longer when done for the first time. You can confirm if the heater plate is faulty by reisistance checking at the bottom right harness on the controller, the readings will be in the info that dave-m has offered to send you.
John
May 5, 2011 at 8:04 am #350518dave-m
ParticipantRe: Fisher pakel drawer dishwasher dd603
You have mail.
D
May 5, 2011 at 8:58 am #350519bmrenr
ParticipantRe: Fisher pakel drawer dishwasher dd603
Cheers guys thanks for the info Dave.
Tom.
March 29, 2012 at 12:12 pm #350520oscar123
ParticipantRe: Fisher pakel drawer dishwasher dd603
I have one flashing F4.. it is heating, I have swapped PCB with one from bottom drawer, same fault. Is the heat sensor built in to heater plate?
Oscar
March 29, 2012 at 1:52 pm #350521johnmac11
ParticipantRe: Fisher pakel drawer dishwasher dd603
It will be a faulty heater, same as the previous one. The sensor is part of the heater plate.
John
March 29, 2012 at 2:03 pm #350522oscar123
ParticipantRe: Fisher pakel drawer dishwasher dd603
thanks for your quick reply John
regards OscarJanuary 7, 2013 at 5:07 pm #350523funkyboogy
ParticipantRe: Fisher pakel drawer dishwasher dd603
reviving an old thread hear – but can anyone ..hint hint john let me know how best to tackle the heater plate ..got one to do soon
January 7, 2013 at 5:47 pm #350524johnmac11
ParticipantRe: Fisher pakel drawer dishwasher dd603
Hi Ally,
It is one of them jobs that would take an age to describe how to do but is actually very simple once you have done one. Have you got the service manual for this machine, it shows you how to do it in there.
John
January 7, 2013 at 6:05 pm #350525funkyboogy
ParticipantRe: Fisher pakel drawer dishwasher dd603
hi john ive no got one .. could you sent cheers ally
January 7, 2013 at 7:07 pm #350526johnmac11
ParticipantRe: Fisher pakel drawer dishwasher dd603
Hi Ally,
Info sent by email.
John
May 27, 2015 at 3:32 pm #350527DDA
ParticipantRe: Fisher pakel drawer dishwasher dd603
Hi John,
I have a job with the same dishdraw. f4 no heat. I have replaced the heatplate and still no heat. I think its going to be the confroller but not to sure as ive only just seen this thread.Do u have the service manual so i can check the rest of the componants before i rush into buying any parts . . . . again.
also i found a website with helpfull videos for the Fisher pakel range.
May 27, 2015 at 3:43 pm #350528DDA
ParticipantRe: Fisher pakel drawer dishwasher dd603
sorry the correct link
http://vimeopro.com/fisherpaykeltechnic … ing-videos -
AuthorPosts
- You must be logged in to reply to this topic.
