Fisher & paykel dd603i not pumping

[mikethemechanic]

Hi all
Don’t see many of these but a good customer of mine asked me would look at this d/w
Bottom draw works fine top one not draining
Put it on a wash it runs the rota slow speed it does turn and doesn’t drain then beeps and stops tried swapping top and bottom rota but still the same I thought it wise to seek advise before diving in.
I noticed a higher pitch noise from the working draw when it drained
Could it be a module or coil fault any suggestions welcome

[electrofix]

Re: Fisher & paykel dd603i not pumping

its only a small pipe into the pump and it can get blocked. remove rotor and check its clear

dave

[mikethemechanic]

Re: Fisher & paykel dd603i not pumping

This was a tiny module under the pump which only had a triac mounted on it sorted

[electrofix]

Re: Fisher & paykel dd603i not pumping

thanks for the feedback on the fault

Dave

[Author]

Posts