Fisher & Paykel smart drive 603

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Fisher & Paykel smart drive 603

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 23, 2005 at 5:39 am #13512
    astro
    Participant

    I recently replaced the motor drive control unit due to an internal fault.

    The replacement unit has a diagnostic code of 00001 001. This unit will turn on but does not start the washing cycle.

    If anyone could help me with this it would be great.

    November 23, 2005 at 9:21 am #155254
    Penguin45
    Participant

    Re: Fisher & Paykel smart drive 603

    This is the size switch error problem. The memory needs to be reset to recognise the new board by entering and exiting the Option Adjustment mode. Push and hold Start/Pause, then push Power.

    Regards,
    Penguin45.

    November 25, 2005 at 1:53 am #155255
    astro
    Participant

    Re: Fisher & Paykel smart drive 603

    thanks very much for that it is working ok now.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.