Fitting a new element – Whirlpool AKZ446/ix

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Fitting a new element – Whirlpool AKZ446/ix

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 25, 2012 at 10:59 am #67563
    edwark
    Participant

    Hi guys,

    Trid to fit the element without taking the oven out but removed the element screws & gently pulled it forwards but the connectors came away. :boops: Which connector goes where?

    One blue cable & one white cable…. 😕

    What happens if you connect it wrong?

    Thanks

    January 27, 2012 at 5:52 pm #367796
    DAR01
    Participant

    Re: Fitting a new element – Whirlpool AKZ446/ix

    If there are only 2 connectors it should’t matter which way around you connect them,i assume it is the circular element which you are replacing.

    Mike

    October 10, 2017 at 5:05 pm #367797
    atl
    Participant

    Re: Fitting a new element – Whirlpool AKZ446/ix

    Hi, can anyone tell me if it is ok to connect the blue and white wires to any of connectors on the new heating element I’ve bought for this cooker please? Whilst taking out the blown element, the wires slipped down the back of the cooker so I don’t know which colour wire should be connected to which connector prong or if it doesn’t matter. Any help appreciated pls

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.