- This topic has 2 replies, 2 voices, and was last updated 13 years, 3 months ago by
.
-
Posts
-
Have a freezer causing problems and would appreciate some tech info,seems to be a board/sensor issue,not really keeping stuff cold enough -12c ish so warning light coming on,system looks ok but would appreciate a manual if anyone has one.
Cheers
BGRe: FZA34P Hotpoint Freezer
draws out back wall removed it will be frozen up , take a hair dryer to it , be carefull of the sensors though .
done a few changed just about every thing on them but 2 years
later frozen up againhth phil
Re: FZA34P Hotpoint Freezer
loopey wrote:draws out back wall removed it will be frozen up , take a hair dryer to it , be carefull of the sensors though .
done a few changed just about every thing on them but 2 years
later frozen up againhth phil
It’s fine,already checked no frost buiild up and evap evenly frosted and defrosting OK,as I say strange!
I wouldn’t change anything until I’m sure it’s at fault so need some tech info if anyone can oblidge!
- You must be logged in to reply to this topic.