gorenje wa61111 sticking

[funbobby]

had a look at this one yesterday and there was no power down to element which was a bad connection at the board but it has come back as still sticking but only when a load is in, any ideas?

[admin]

Re: gorenje wa61111 sticking

Hi

this machine has a fault code system which will throw up flashes,dependent on the number of flashes is the fault,where along in the program does it stick ?

bryan

[funbobby]

Re: gorenje wa61111 sticking

about 20 mins in, 3 flashes which says fill problem but nothing wrong with water supply.

[funbobby]

Re: gorenje wa61111 sticking

anyone?

[orion610]

Re: gorenje wa61111 sticking

Hi , is it filling to the correct level , pressure switch ok ???

I have one that is sticking in the rinse cycle but not showing any fault codes !

I think i’m going to try a new pcb .

[adv]

Re: gorenje wa61111 sticking

had a indesit w dryer do that kind off /the weight was making a broken wire on dryer heater make an break.just a thoght 😆

[Author]

Posts