- This topic has 1 reply, 2 voices, and was last updated 12 years, 10 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Re: Gorenje WDI 63113
Tachogenerator failure, motor blocked
– The wash programme is stopped for 120 seconds
– The error counter starts counting
– If the error counter counts 3 faults the error code F08 is displayed
– When the stop time is exceeded the programme begins again
If the error does not occur in the next 20 seconds the error counter is reset. The programme stops (in any
instance) and starts again in the same position. If the error occurs in the spin phase the programme will
start the whole spin sequence again from the start.
This error returns to the initial conditions if the error is reset.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.