Hardware key

[allan73]

someone has told me that with an Indesit hardware key and software, you can establish if m/c’s have been overloaded is this correct ?

[johnnyj]

Re: Hardware key

You can bring up the staiistics detailing any fault codes detected, what programe the customer has used also shows if she is guilty of washing out of balance loads etc its handy to prove to the customer its her loading that is the problem.

[trotter]

Re: Hardware key

johnnyj wrote:You can bring up the staiistics detailing any fault codes detected, what programe the customer has used also shows if she is guilty of washing out of balance loads etc its handy to prove to the customer its her loading that is the problem.

And just by pointing out the badge on the front, you can point out that it was,in fact, also her fault for buying such a pile of sh*t in the first place!

Don’t you just LOVE good aftersales! :rotfl:

[adv]

Re: Hardware key

ha ha 😆

[allan73]

Re: Hardware key

So this thing can read if the m/c been out of balance but can it tell if it’s been overloaded ?

[trotter]

Re: Hardware key

You don’t need a hardware key to see if it’s been overloaded! Just ask the customer what weight she puts in when washing anything other than cottons!

She won’t know ‘cos they don’t read the instructions! and that statement is more reliable than the whole of her machine 😳

[Author]

Posts