Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › haus dishwasher over filling
- This topic has 10 replies, 3 voices, and was last updated 12 years, 11 months ago by
fasetester.
-
AuthorPosts
-
April 16, 2013 at 2:08 pm #75046
fasetester
Participantwent to check out this dishwasher it had actvated antiflood tipped dishwasher back drained out water?
retried same problum disconnected water valve hose checked underneath some dampness not a lot float seemed ok could see no leaks.
tried again now over filling checked pressure switch seemed to be holding. does anyone have any information on this dishwasher. also tried to remove bottom kick pannel after removing 4 screws to get at a screw to remove side panell cant see any screws holding could not get it off thanks fasetester.
April 16, 2013 at 3:17 pm #393689Jackal
ParticipantRe: haus dishwasher over filling
Model number would perhaps help us choose which one of 68 units your in need if help on
Jackal
April 16, 2013 at 3:51 pm #393690fasetester
ParticipantRe: haus dishwasher over filling
dont have mod no at this time ser no fa07lie0000fa98x0030 thanks fasetester.
April 17, 2013 at 10:53 am #393691fasetester
ParticipantRe: haus dishwasher over filling
jackal the model no is DW 12 emf thanks fasetester
April 17, 2013 at 2:35 pm #393692fasetester
ParticipantRe: haus dishwasher over filling
fasetester wrote:jackal the model no is DW 12 emf thanks fasetester
any one have any info on this dishwasher have to go back tomorrow thanks fasetester
April 18, 2013 at 1:11 pm #393693fasetester
ParticipantRe: haus dishwasher over filling
does no one have any details on this dishwasher if the pressure sw is ok. what else control the pressure sw it seem like a blockage. if the antflood is running then when i tried it again. it would fill. but over fill?
i need to get the kick plate off does anyone know what is holding it when i have removed all the screws but it still wont buge 😕 . thanks fasetesterApril 18, 2013 at 3:52 pm #393694fasetester
ParticipantRe: haus dishwasher over filling
well martin if you dont know it no one does how does the kick plate come off? thanks fasetester.
April 18, 2013 at 5:18 pm #393695iadom
ModeratorRe: haus dishwasher over filling
fasetester wrote:well martin if you dont know it no one does how does the kick plate come off? thanks fasetester.
I very much doubt that Martin, like me will ever soil his hands on a piece of Chinese made tat like this, one reason for the lack of any replies I’m afraid. 😥
April 22, 2013 at 2:38 pm #393696fasetester
ParticipantRe: haus dishwasher over filling
i was not asking martin to soil his hand jim just some information. out of the all the engineers on this forum.not one person has repaired this make of dishwasher.
i went back and got it striped down tested every thing still no joy some program it would work ok others did not fasetester
April 22, 2013 at 2:41 pm #393697iadom
ModeratorRe: haus dishwasher over filling
You misunderstood my post, asking Martin for advice on these is not likely to elicit a response as I have intimated, he is very unlikely to have even seen one, let alone touched one, unless he has his 10 foot barge pole to hand. 😉
April 24, 2013 at 2:17 pm #393698fasetester
ParticipantRe: haus dishwasher over filling
so i take it their is no information on repairing this dishwasher. i know some of you call it chinese tat.
what makes it chinese tat no information no parts available ect.i would like to here the reason.fasetester.
-
AuthorPosts
- You must be logged in to reply to this topic.
