HELP!!! Servis Easi Logic M6160S

[D44]

Can anyone give me advise please.

I have been having problems with my washing machine for a few months. I have replaced the module and still no luck.

The problem is that my machine works perfectly well until the rinse and spin part of the cycle. As soon as it reaches 40 mins in sticks. In order to get it to complete the cycle I have to manually put it on a cold wash then onto spin. The rinse doesnt work at all and the clothes dont come out smelling very clean. Can anyone advise me what to try next. I have contacted servis and they cannot help and the engineer says I would be cheaper with a new machine (slight cashflow problem :rolls: )

Model Number: M6160S

Serial Number: 20033602294-010077194-0102

Any help would be gratefully recieved

[gegsy]

Re: HELP!!! Servis Easi Logic M6160S

Hi
It sounds as if one of your fill valves has failed, a test with a suitable meter should reveal the faulty one.
Un plug appliance if you are to investigate.

Greg

[D44]

Re: HELP!!! Servis Easi Logic M6160S

Hi

Thanks for getting back to me.

Does this mean I would need to call the engineer out again? Is there anything i can check myself first?

[Penguin45]

Re: HELP!!! Servis Easi Logic M6160S

If you have a test meter, you’d be looking for about 3.5kOhms across the solenoids, with the valve split from the circuit. If you haven’t, engineer time.

Power off before touching anything……

Regards,
Penguin45.

[D44]

Re: HELP!!! Servis Easi Logic M6160S

oh dear 🙁 thanks for your help though

[Author]

Posts