- This topic has 4 replies, 3 voices, and was last updated 21 years, 7 months ago by
.
-
Posts
-
Can anyone give us advise before we bring this machine in….. BOSCH SGS0902GB/05 Dishwasher… Stops mid cycle.. pump/valve/heater ok… Is there probs with TOC thermostats with these machines if so where are they located etc ??? Thanks in advance….
Re: Help with Bosch Dishwasher….
Cleat, from the web links……
http://www.bshappliancecare.com/Bosch/boschspares.html
Click on “Launch the QuickFinder Application” put the Enr in, click “start search”.
Lots of blow ups will be there for you.
Dave.
Re: Help with Bosch Dishwasher….
Cleat,
It is difficult to establish at what point they actually stick. “Mid-cycle” could be anywhere really 🙁
The most usual problems with these is pump blockage in sump, pressure chamber to sump hose blockages and timeouts caused by drain coupling problems 😉
Hope that gives you clues, but fix it ‘on site’ ’cause’ that may be where the problem lies 😉 Never waste time and money “taking these in” 🙂
Martin
Re: Help with Bosch Dishwasher….
UPDATE ive since found out ” stops mid-cycle” the customer means trips earth leakage trip.. but not everytime and on program 3 ??… our engineer calling again tommorrow afternoon… any ideas before he goes again would be helpful … Thanks
- You must be logged in to reply to this topic.