help with Hotpoint WF340

[waters]

I have a Hotpoint WF340
When start is pressed the on off flashes wildly, also mini load and wash enhance flashes and the machine starts filling
thanks

[Martin]

Re: help

Did you look in the “Known Error Codes thread?”

In there it shows LED’s 1 & 4 = F09 Eeprom/setup error 😯

[waters]

Re: help

I sold the machine about 7 months ago and got a call today

[Martin]

Re: help

waters wrote:I sold the machine about 7 months ago and got a call today

Well you may just have to reconfigure the eeprom then I guess – dunno? 🙁

Incidentally, I went to a WF340P/WE on Monday being used at a Riding Stables to clean the horse blankets. One horses bridle had been put in with the blankets by mistake and ripped up the inner drum to an oval shape.8O

I didn’t realise that Hotpoint WF’s had WELDED DRUMS? until I saw that heap of horse doo doo. I guess that’s what the suffix in the model number means then?

Oh Joy! 😈

[iadom]

Re: help with Hotpoint WF340

Yep, WE welded, SC screwed.

[waters]

Re: help with Hotpoint WF340

Exchanged the machine,got the machine back to workshop and now cant fault it.Machine start light normal and no flashing lights.Put it through a couple of washes and all ok.Can anyone explain what would cause this .

[bazza500]

Re: help with Hotpoint WF340

Was it being used in a cold damp room? This can cause condensation on the boards and all kind of wierd faults. Sometimes taking it into a nice warm workshop is enough to solve it.

[waters]

Re: help with Hotpoint WF340

I did not connect it up or take it out.I did notice that the pipe from the sump to the pump was weeping very slightly at the pump connection .

[Author]

Posts