hja8362 dishwasher fault

[glennpunkuk]

My dishwasher is draining fine. When the cycle switches on it just fills with cold water in the bottom of the dishwasher and nothing else happens, I’ve opened the front panel and set the cycle running again and noticed the element is heating the water but no further than the rubber hose at the front, there’s no hot pumping into the dishwasher its self at all.Any help would be appreciated as to its fault. Thanks

[Allsorts]

Re: hja8362 dishwasher fault

Is it heating the water to the point of getting warm or hot

If warm the thermostat
If hot then wash motor or PCB

[glennpunkuk]

Re: hja8362 dishwasher fault

I set it to a 70 degree wash and the rubber pipe is really hot,there’s also being a slight smell of burning, like circuitry, could this be a good inclination of the pcb board?

[Author]

Posts