HNWL6136 Tech info and wiring information please!!

This topic has 3 replies, 2 voices, and was last updated 12 years, 12 months ago by Profyaffle.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
April 11, 2013 at 5:34 pm #74983

Profyaffle
Participant

I’m desperate for test procedure and technical info on this please peeps. Chris

April 11, 2013 at 6:20 pm #393493

Martin
Participant

Re: HNWL6136 Tech info and wiring information please!!

Hoover Nextra error codes are listed on page 3 of error codes thread.

April 11, 2013 at 6:28 pm #393494

Profyaffle
Participant

Re: HNWL6136 Tech info and wiring information please!!

Yes Martin, I’ve got that far, I’m on a washer dryer that will only go as far as the first stage fill. Diagnostic is going through fine so I’m flummoxed 🙁 pressure switch checks out ok

April 11, 2013 at 8:04 pm #393495

Martin
Participant

Re: HNWL6136 Tech info and wiring information please!!

And when it fails the LED’s don’t flash an error code?
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.