homark

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › homark

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • August 16, 2004 at 2:34 pm #6040
    PINKY
    Participant

    afternoon all. Any no where i can get homark spares?

    August 16, 2004 at 2:36 pm #115250
    kwatt
    Keymaster

    woz or Dave can help. 😉

    K.

    August 16, 2004 at 4:25 pm #115251
    Dave_Conway
    Participant

    Re: homark

    Yeah, if you let me know more info Pinky, I’ll check it out for you.

    Dave.

    August 23, 2004 at 9:23 pm #115252
    charlieboy
    Participant

    Re: homark

    i get most of my homark spares from masterpart gen or pattened..01702 310031……….or go on http://www.masterpart.com and you will see there whole catalogue with pictures…..

    August 27, 2004 at 1:34 pm #115253
    PINKY
    Participant

    Re: homark

    HI DAVE..

    WE NEED BOTH SIDES ,TOP AND BOTTOM FLAPS/HINGES? MAKE ANY SENSE?MY THE ENGINEER WHO ODERED THE PARTS HAS BUGGERED OFF ON HIS HOLS! MANY THANKS

    PINKY

    August 27, 2004 at 1:54 pm #115254
    Dave_Conway
    Participant

    Re: homark

    PINKY wrote:MAKE ANY SENSE?

    It would if you let me have the model number Pinky 😉

    Dave.

    August 31, 2004 at 1:11 pm #115255
    PINKY
    Participant

    Re: homark

    DAVE.

    ITS A 02-900290? PART NUMBERS POSS -271 X2 AND -141X2

    PINKY

    August 31, 2004 at 1:39 pm #115256
    Dave_Conway
    Participant

    Re: homark

    I should have read the email you sent me properly 😉 I didn’t notice “Pinky” at the bottom, just the email address, it just clicked.

    Anyway, that model number is either incorrect or not listed, the closest I can find is either 02-900294 or 02-900394, the second one is frost free, the other is standard, if it’s either of those, let me know.

    Dave.

    September 1, 2004 at 4:02 pm #115257
    PINKY
    Participant

    Re: homark

    DAVE..

    IT HAS TO BE 02900294..

    PINKY

    September 1, 2004 at 5:22 pm #115258
    Dave_Conway
    Participant

    Re: homark

    Just to make sure, I emailed you the diagram 😀

    Dave.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.