Hoover 8kg totally dead.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover 8kg totally dead.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 5, 2008 at 4:48 pm #37204
    Madmac
    Participant

    Mod is VHD814. only around a year old, interlock locks door but panel light continues to flash as if you havnt pressed start. Main module would be likely culprit i would think but havnt seen this machine before.

    Anyone came across similar ? And does anyone know if EMW do these panels yet ? Thanks.

    June 5, 2008 at 8:48 pm #253880
    Alan1476
    Participant

    Re: Hoover 8kg totally dead.

    HI there have you checked the motor brushes as this sometimes causes that problem

    June 5, 2008 at 9:39 pm #253881
    Madmac
    Participant

    Re: Hoover 8kg totally dead.

    Had a peek at the com which looked nice & shiny, machines only 12 months old. However, when i think about it, had a servis of a similar age 2 weeks ago with barely worn but stuck carbs, com was shiny too.. still suspect the panel though.. its got made in China on it. :eeek:

    June 5, 2008 at 11:33 pm #253882
    Penguin45
    Participant

    Re: Hoover 8kg totally dead.

    Core board (programmed) is 49010509. Assuming nothing else is out of circuit.

    Chris.

    June 6, 2008 at 10:19 am #253883
    Madmac
    Participant

    Re: Hoover 8kg totally dead.

    Cheers, think i’ll have to nip back when i have more time & double check all basic circs in case i’ve missed summit.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.