HOOVER AL130

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HOOVER AL130

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 14, 2006 at 9:52 am #19144
    PGS
    Participant

    Hi called to above M/C today, Customer complaining that after prog is selected it takes minimum of 10 mins to start I confirmed this on several progs, is this a possible PCB or selector switch fault cheers Paul.

    July 14, 2006 at 10:30 am #181900
    Simon46
    Participant

    Re: HOOVER AL130

    Start washing or start filling? Thinking along the lines of selfbore tap with slow/restricted water flow?

    S.

    July 14, 2006 at 10:40 am #181901
    Dave_Conway
    Participant

    Re: HOOVER AL130

    I would suspect the door lock to be honest, part number 90489300 (common part).

    PCB is part number 97917157 if the lock is OK 🙂

    Dave.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.