- This topic has 1 reply, 1 voice, and was last updated 18 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
machine fills and then pulses between fill and wash pump action.It would appear that as the wash pump comes on it sucks the water out the sump and resets the pressure switch.Any ideas very welcome 💡
Re: HOOVER DISHWASHER MODEL HND 315 80
upon further checking it appears the click is not the pressure switch but the flow switch.as it pulses between fill and wash pump the cycle indicator dims.Looks as though it may be the circuit board,no obvious signs of burnt joints but discoloured components and pcb
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.