hoover dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover dryer

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 20, 2018 at 11:00 am #95179
    dopper
    Participant

    md hl v8dg-80 31100844 the board was knacked so fitted a new one and was working ok, now the start button wont work, just wondering if i should change the touch button part, its part of the [h=1]Facia panel[/h] anyone had this problem or could it be a bad board?
    Cheers

    December 20, 2018 at 5:24 pm #459627
    neon_3SP_glow
    Participant

    Remove it and see if any of the plastic zigs are broken. If its the type i am thinking of.

    also often board becomes loose as plastic clips break which hold it steady.

    gl

    December 20, 2018 at 5:25 pm #459628
    neon_3SP_glow
    Participant

    Is the button clicking?

    January 2, 2019 at 9:39 am #459629
    dopper
    Participant

    hi no button on this one as its ribbon type, touch button

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.