hoover HNWL7166-80 pcb

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › hoover HNWL7166-80 pcb

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 4, 2013 at 2:01 pm #78454
    eastlmark
    Moderator

    have a blown module on this hoover washer drier. 310013590741656 HNWL7166-80 litsted as “unprogrammed” does anyone know how programming is achieved?
    thanks

    December 4, 2013 at 2:42 pm #405743
    Martin
    Participant

    Re: hoover HNWL7166-80 pcb

    The programmed coreboard = 09200706
    The un-programmed version = 41012586

    To programme the un-programmed requires a MEM Programming Unit (see below). Software downloaded from the Gias website.

    December 4, 2013 at 6:40 pm #405744
    eastlmark
    Moderator

    Re: hoover HNWL7166-80 pcb

    Thank you Martin.
    will I be investing in this? Now let me think……
    NAH!

    December 4, 2013 at 7:00 pm #405745
    admin
    Keymaster

    Re: hoover HNWL7166-80 pcb

    Hi Mark

    Is the customer prepared to wait a few days ?

    I can get it programmed for you

    Bryan

    December 4, 2013 at 7:14 pm #405746
    Martin
    Participant

    Re: hoover HNWL7166-80 pcb

    r600a wrote:I can get it programmed for you

    Will it take long Bryan? :clown:

    December 4, 2013 at 7:21 pm #405747
    admin
    Keymaster

    Re: hoover HNWL7166-80 pcb

    That one Martin.. I think will take a bit longer

    Bryan

    December 4, 2013 at 11:50 pm #405748
    eastlmark
    Moderator

    Re: hoover HNWL7166-80 pcb

    Thanks Bryan, only about £20 in it so probably not worth the postage sending it over…

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.