Hoover HPB145 Washing Machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover HPB145 Washing Machine

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 2, 2007 at 6:08 pm #29474
    mike412
    Participant

    Hi Guys.

    Are there any Hoover guys out there that can tell me how to cancel the programme on this machine. I cant get this out of rinse fill, I guess its blocked pressure bottle or similar, but it would be nice to be able to get the machine onto pump/spin to get rid of the water in the drum. Customer has lost instructions, went to another job today same machine, guess what.. they had lost instructions also.

    Any assistance as usual greatly appreciated.

    Regards,

    Mike

    August 2, 2007 at 6:19 pm #223350
    timdowning
    Participant

    Re: Hoover HPB145 Washing Machine

    If it dosen’t reset by just turning it to OFF. Then hold down start button for 5 seconds.

    August 2, 2007 at 6:49 pm #223351
    mike412
    Participant

    Re: Hoover HPB145 Washing Machine

    Thanks for that Tim, Much appreciated.

    Regards,
    Mike

    August 3, 2007 at 6:58 pm #223352
    mike412
    Participant

    Re: Hoover HPB145 Washing Machine

    Hi Folks.

    Went back to this job today, still cant get it out of fill mode. I understand from another source that this is a module fault (common).
    In the meantime the customer has found her instruction book, complete with registration of extended warranty. Oh happy days.

    Regards,
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.