- This topic has 0 replies, 1 voice, and was last updated 2 years, 2 months ago by
.
Viewing 1 post (of 1 total)
-
Posts
-
Hi guys hope you can help. This tumble dryer it starts turning…heater start geting warm …10 seconds later I can ear a click from one of the relays on the front panel ….it stops…then restart but with all lights flashing red and the heating element will stay cold .
I have checked continuity on the 2x sensors on the heating element and they seems to be ok as the multimeter it beeps…..I pull out the front NTC sensor…. testing for continuity and I get no beeps from multimeter but when checking ohms the value change depending on outside temperature blown at it.
relay on pic tested and working
What is my next step? Does it have more sensors somewhere else? Thank youlink to video [video]https://photos.app.goo.gl/Lef7N2rpwkCkumU88[/video]
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.